Sony MDS-JA333ES manual 22

MDs to Recording

Operations you may want to do during CD Synchro-recording

To	Press
Stop recording	CD-SYNC STOP
Pause recording	CD-SYNC STANDBY or CD
	PLAYER X
Locate the next track to be
recorded during recording	CD PLAYER ./>
pause
Resume recording after	CD-SYNC START or CD
pausing	PLAYER X
Check the remaining	TIME (page 18)
recordable time on the MD

zYou can use the remote of the CD player during CD Synchro-recording

Press	To change the deck to	And change the CD
		player to
H	Recording	Play
x	Recording pause	Stop
X	Recording pause	Pause

zDuring CD Synchro-recording, track numbers are marked in the following ways:

•When the CD player is connected to the DIGITAL IN connector, track numbers are automatically marked as they appear on the CD.

•When the CD player is connected to the ANALOG IN jacks, track numbers are automatically marked when “T.Mark Lsyn” has been selected (page 19).

•When you resume recording after recording pause, a new track number is automatically marked, regardless of the track marking parameter setting (“T.Mark Lsyn” or “T.Mark Off”).

zYou can change CDs during CD Synchro-recording

1Press x on the CD player’s remote.

2Change the CD.

3Press Hon the CD player’s remote. Recording resumes.

zYou can also perform synchro-recording with a Sony video CD player

By reprograming the MD’s remote, you can use the procedure above to perform synchro-recording with a Sony video CD player.

Press number button 2 while pressing down ?/1 on the MD deck’s remote. You can now operate the MD deck and the video CD player with the remote. To control the CD player again, press number button 1 while pressing down ?/1 on the MD deck’s remote.

zDuring CD Synchro-recording, the deck copies CD text information (CD text and disc memos) as it is to the MD (Disc Memo Copy Function)

The Disc Memo Copy Function operates when you make a CD Synchro-recording from a Sony CD player connected with a control A1ΙΙ cable (not supplied) to the MD deck.

Notes

•When performing CD Synchro-recording with a CD player with a mode selector, be sure to set the selector to CD1.

•When you record tracks from certain CD or multi-disc players, the entire material may be recorded as a single track.

•The Disc Memo Copy Function may not operate for extremely short CD tracks.

•Text information may not be copied for some CDs.

Making a CD Synchro-recording from a Sony CD player connected with a control A1ΙΙ cable

1Do steps 1 to 3 of “Synchro-recording with a Sony CD player” on page 21.

2Set the CD player to playing pause mode.

3Press z on the deck.

The MD deck changes to recording pause.

4Press N or X on the deck.

The deck starts recording and the CD player starts to play. When CD play finishes, recording stops.

GB 22 Synchro-recording with a Sony CD player