Erasing a track or disc name

Use this function to erase the name of a track or disc.

1While the deck is stopped, playing, recording, or paused, press MENU/NO.

“Edit Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “Name ?” appears, then press AMS or YES.

3Turn AMS (or press ./> repeatedly) until “Nm

Erase ?” appears, then press AMS or YES.

4Turn AMS (or press ./> repeatedly) until the number of the track (when erasing the track name) or “Disc” (when erasing the disc name) flashes, then press AMS or YES.

“Complete!!” appears for a few seconds and the name is erased.

To cancel the operation

Press MENU/NO or x.

Erasing all the names on the MD

You can erase all the track names and the disc name on an MD in a single operation.

1While the deck is stopped, playing, or paused, press MENU/NO.

“Edit Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “Name ?” appears, then press AMS or YES.

3Turn AMS (or press ./> repeatedly) until “Nm

AllErs ?” appears, then press AMS or YES.

“Nm AllErs ??” appears in the display.

4Press AMS or YES.

“Complete!!” appears for a few seconds and all the names on the MD are erased.

To cancel the operation

Press MENU/NO or x.

zYou can erase all the recorded tracks and names on the MD

For details, see “Erasing all the tracks on an MD” on page 32.

Undoing the last edit

(UNDO)

You can undo the last edit operation and restore the contents of the MD to the condition that existed before the operation. Note, however, that you cannot undo an edit operation if you perform any of the following operations after the edit:

•Start recording.

•Press z or MUSIC SYNC on the remote.

•Change the recorded level after recording (S.F Edit).

•Turn off the deck or eject the MD.

•Disconnect the AC power cord.

1While the deck is stopped and no track number appears in the display, press MENU/NO.

“Edit Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “Undo ?” appears.

“Undo ?” does not appear if no editing has been done.

3Press AMS or YES.

One of the following messages appears depending on the last edit operation.

Last edit operation

Message

 

 

Erasing a track

 

 

 

Erasing all the tracks on an MD

Erase Undo?

 

 

Erasing a portion of a track

 

 

 

Dividing a track

Divide Undo?

 

 

Combining tracks

CombineUndo?

 

 

Moving a track

Move Undo?

 

 

Naming a track or MD

 

 

 

Copying a track or disc name

 

 

 

Renaming a track or MD

Name Undo?

 

 

Erasing a track or disc name

 

 

 

Erasing all the names on the MD

 

 

 

4Press AMS or YES.

“Complete!!” appears for a few seconds and the MD is restored to the condition that existed before the edit operation.

To restore your edit

Press MENU/NO or x.

MDs Recorded Editing

Naming a track or MD/Undoing the last edit 37 GB