1While the deck is playing, press MENU/NO twice.

“Setup Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “Pfine” appears, then press AMS or YES.

3Turn AMS (or press ./> repeatedly) until the desired value appears, then press AMS or YES.

4Press MENU/NO.

To recall the factory setting

Press CLEAR while setting the value.

Notes

•The playing sound drops out momentarily when you change the fine control value.

•The fine control value reverts to “0.0%” (factory setting) when you turn off the deck or eject the MD.

•The step and fine control values are linked; changing one value also changes the other.

Functions Other

Fading in and fading outZ

You can use Fade-in Play to gradually increase the signal level to the ANALOG OUT jacks and the PHONES jack at the start of playing. Fade-out Play gradually decreases the signal level at the end of playing.

Fade-in Recording gradually increases the signal level at the start of recording. Fade-out Recording gradually decreases the signal level at the end of recording.

` / 1

Z

HX x

.>

mM

X. >

FADER

Note

The level of the signal output from the DIGITAL OUT connector does not change during Fade-in Play nor Fade-out Play.

Fade-in Play and Fade-in Recording

During play pause (for Fade-in Play) or recording pause (for Fade-in Recording), press FADER.

bflashes in the display and the deck performs Fade-in Play or Fade-in Recording for five seconds (factory setting) until the counter reaches “0.0s.”

Fade-out Play and Fade-out Recording

During play (for Fade-out Play) or recording (for Fadeout Recording), press FADER.

Bflashes in the display and the deck performs Fade-out Play or Fade-out Recording for five seconds (factory setting) until the counter reaches “0.0s,” then pauses.

GB 40 Changing the pitch/Fading in and fading out