Sony MKS-2010, MKS-2015, MKS-2017 To mask part of the secondary color correction, To execute RGB clip, To execute luminance processing, RGB Clip, Luminance Processing

1 Press [Secondary], turning it on.

2 Press the button for the color to adjust ([Blue], [Cyan], [Green], [Yellow], [Red], or [Magenta]), then adjust the following parameters.

Knob		Description	Setting values
1	(Lum)	Luminance	–100.00 to +100.00
2	(Sat)	Saturation	0.00 to 200.00
3	(Hue	Hue delay	–180.00 to +180.00
Delay)

To return secondary color correction parameters to their default settings

Press [Unity].

To mask part of the secondary color correction

Press [Mask] in the Secondary menu, turning it on. The proceed as explained in “To mask part of the primary color correction” (see page 114).

RGB Clip

You can make the following adjustments for RGB signals.

•Dark clip (lower limit of signal level)

•White clip (upper limit of signal level)

To execute RGB clip

Display the RGB Clip menu, then proceed as follows.

Knob		Description	Setting values
2	(Green)	Dark/white clip of G	–50.00 to +150.00
		(green) signal
3	(Blue)	Dark/white clip of B	–50.00 to +150.00
		(blue) signal
4	(All)	Dark/white clip R, G,	Red value is
		and B signals	shown
		(adjusted
		simultaneously)

To return RGB clip parameters to their default settings

Press [Unity].

Luminance Processing

You can divide the luminance levels of YUV signals into three regions (Dark, Middle, and Bright), and adjust the video signals of each region separately.

1Under Dark point

2 Middle/Dark point

3 Bright/Middle point

4 Over Bright point

Dark region Middle region Bright region

To execute luminance processing

Display the Luminance Process menu, then proceed as follows.

Operations Advanced 6 Chapter

1 Press [RGB Clip], turning it on.

2 Press [Dark] or [White], then set the following parameters.

Knob	Description	Setting values
1 (Red)	Dark/white clip of R	–50.00 to +150.00
	(red) signal

1 Press [Lum Proc], turning it on.

2 Press [Mode].

A popup window appears so that you can select the adjustment mode.

3 Depending on what you want to adjust, press one of the following to select an adjustment mode.

Color Correction 115