Operations Basic 5 Chapter

Changing Pattern Position and Size With the Joystick

1

CTR button

2

 

1 CTR button 2

1.5 M/E panel

1 M/E panel

1 Press the [POS] button in the Effect/Wipe control block, lighting it.

The joystick is assigned to the positioner (which changes effect pattern position and size).

2 For a 2-channel effect, select the channel or channels for which you want to make settings. (See “To select channels with the Effect/Wipe control block” (page 61).)

(You can set the parameters for the individual channels.)

3 Operate the joystick as shown below, depending on what you want to change.

Joystick direction

Description

Setting values

 

 

 

X (H Position)

Horizontal position

–200.00 to +200.00

 

 

 

Y (V Position)

Vertical position

–200.00 to +200.00

 

 

 

Knob (Size) a)

Effect pattern size

0.00 to 200.00

a)Not available for some patterns. For details, refer to “Effect Pattern Transformations and Modifications” in the Appendix (separate document).

To return the pattern size and position to their default

Press the [CTR] button in the Effect/Wipe control block.

Changing Pattern Size and Position From Menus

1 From the top menu, select Effect/Wipe >M/E Effect >Main. The Main menu appears.

64 Changing the Position and Size of Effect Patterns