Knob | Description | Setting values |
|
|
|
3 (Invert Type) | Replication layout | 1 to 4 (see the |
|
| following figure) |
|
|
|
1:All patterns point in same direction
2:Even numbered rows move in horizontal direction
3:Even numbered columns and rows are inverted
4:Even numbered columns and rows are inverted, and even numbered rows move in horizontal direction
3 For an M/E effect, do the following to invert the direction of every other pattern.
•To invert every other pattern in the horizontal direction, press [H Invert].
•To invert every other pattern in the vertical direction, press [V Invert].
To mix in a diamond dust effect (Dust Mix)
This procedure is supported only for M/E effects.
1 In the Effect/Wipe >M/E Effect >Modify (Ptn No.
2 Set the following parameters with the knobs.
| Knob | Description | Setting values | |
|
|
|
|
|
| 1 | (Mix Ratio) | Ratio of diamond | 0.00 to 100.00 |
|
|
| dust mixed in |
|
|
|
|
|
|
| 2 | (H Size) | Horizontal size of | 0.00 to 100.00 |
|
|
| particles |
|
|
|
|
|
|
| 3 | (V Size) | Vertical size of | 0.00 to 100.00 |
|
|
| particles |
|
|
|
|
| |
| 4 (Flash Rate) | Flash rate of | 0.00 to 100.00 | |
|
|
| particles |
|
|
|
|
|
|
|
|
|
|
|
Cropping Effects
To turn the crop function on
This operation can only be carried out on M/E effects. It is not supported for some patterns.
For more information, refer to “Effect Pattern Transformations and Modifications” in the Appendix (separate document).
Crop: Off | Crop: On |
1 Press the [CROP] button in the Effect/Wipe control block, turning it on.
Or, in the Effect/Wipe >M/E Effect >Crop menu, turn [Crop] on.
2 Select the operating channels. (See “Selecting Channels” (page 61).)
3 Set the following parameters with the knobs.
Knob | Description | Setting values | |
|
|
|
|
1 | (Left) | Crop left side of | |
|
| image. |
|
|
|
|
|
2 | (Right) | Crop right side of | |
|
| image. |
|
|
|
|
|
3 | (Top) | Crop top side of | |
|
| image. |
|
|
|
|
|
4 | (Bottom) | Crop bottom side of | |
|
| image. |
|
|
|
|
|
5 | (All) | Crop all sides of | Left value shown |
|
| image. |
|
|
|
|
|
To crop to 4:3 in 16:9 mode
In HD format 16:9 mode, you can crop the video to 4:3.
1 Press the [CROP] button in the Effect/Wipe control block, turning it on.
Or, in the Effect/Wipe >M/E Effect >Crop menu, turn [Crop] on.
2 In the Crop menu, press [4:3 Crop].
Operations Advanced 6 Chapter
Advanced Effect Operations | 97 |
|
|