The abbreviation for the currently selected application appears on the [Target] button. The status area shows the device ID (Unique Device ID) for the currently selected application, and the model number, product name, and current state ([Active] or blank) of each of the options available. Unsupported option columns are grayed out.

To change the application for which device ID and option information is displayed

Press [Target].

When the popup window appears, press the button for the application for which you want to view the information. The button names are the same as the application abbreviations (see “Abbreviations for applications” (page 161)).

Entering an installation key to activate an option

1 Referring to the previous item “Checking the device ID,” display the License menu for the application for which you want to activate an option.

2 Select the option you want to use.

•Press directry on the list in the status area.

•Use the arrow buttons to scroll the reverse video cursor.

•Turn the knob.

Knob

Description

Setting values

 

 

 

1 (No)

Selection of option

1 and upwards a)

 

you want to use

 

 

 

 

a) The maximum value depends on application.

3 Press [Activate].

A keyboard window appears.

4 Enter the installation key.

If the installation key is correct: a message appears,

indicating that the option will be activated by carrying out a restart. Press [OK] in the dialog box, and proceed to step 5.

If the installation key is incorrect: a message appears, indicating that the installation key is incorrect. Press [OK] in the dialog box, go back to step 3, and re-enter the installation key.

5 Using either of the following methods, restart the system.

•In the Setup/Diag >System >Initialize menu, press [Reset].

•Exit the menu system, power the control panel off and then power it on again.

Note

Be sure to exit the menu system before powering the control panel off. (On how to exit the menu system, see “Exiting the Menu System” (page 42).)

After the restart, when you display the License menu, for the activated option, the [Condition] column shows [Active].

To deactivate an option

1 Referring to steps 1 and 2 of “Entering an installation key to activate an option,” select the option you want to deactivate.

2 Press [Deactivate].

A confirmation message appears, prompting whether to deactivate the option.

3 Press [Yes] in the dialog box.

A message appears, indicating that after a restart the option will be deactivated.

To cancel deactivating the option

Press [No] in the dialog box.

4 Press [OK] in the dialog box, restart the system.

After the restart, when you display the License menu, for the deactivated option, the [Condition] column is blank.

Settings System 9 Chapter

Installing Software 163