If [New] is on, turn it off.

2 Press [New], turning it on, then turn the knobs to set the following parameters.

Knob

Description

Setting values

 

 

 

 

1

(CP FR (FR))

Copy-from source

1 to 1024

 

 

start address

 

 

 

 

 

2

(CP FR (To))

Copy-from source

1 to 1024

 

 

end address

 

 

 

 

3 (CP To (FR))

Copy-to source start

1 to 1024

 

 

address

 

 

 

 

 

3 Press [Set].

A new tally copy setting based on the settings made in step 2 is added.

To modify tally copy settings

1

2 Using any of the following methods, select the setting to change.

•Press directry on the list in the status area.

•Use the arrow buttons to scroll the reverse video cursor.

•Turn the knob.

Knob

Description

Setting values

 

 

 

1 (No)

Copy setting selection

1 and upwards

 

 

 

3 Turn the knobs to set the following parameters.

Knob

Description

Setting values

 

 

 

 

2

(CP From)

Copy-from source

1 to 1024

 

 

 

 

3

(CP To)

Copy-to source

1 to 1024

 

 

 

 

4 Press [Set].

To sort tally copy settings

1 Select a copy setting by carrying out steps 1 and 2 of “To modify tally copy settings,” then press [Sort].

A popup window appears.

2 Select one of the following to execute the sort.

From Source: Sort in ascending order (smallest first) by From Source name.

To Source: Sort in ascending order by To Source name.

To delete tally copy settings

Select a copy setting by carrying out steps 1 and 2 of “To modify tally copy settings,” then press [Delete].

External Device Connection Port Setup (Device Menu)

To control external devices connected to the RS-422A 9- pin serial ports of the DCU, use the Device menu to make port settings.

See “Controlling External Devices” (page 146) for more information about controlling external devices.

Assigning devices to DCU ports

1 From the top menu, select Setup/Diag >Device >Port Assign.

The Port Assign menu appears. The status area shows a list of devices currently assigned to ports, together with information about how they are controlled.

Device control settings are made in the Device Assign menu. For details, see page 188.

2 Using any of the following methods, select the target port for a device assignment.

•Press directry on the list in the status area.

•Use the arrow buttons to scroll the reverse video cursor.

•Turn the knob.

Settings System 9 Chapter

Other Settings 187