Operations File 7 Chapter

“1 SYSTEM” is specified as the target directory. (No other directory can be selected.)

3 Press the button for the desired media type (Hard Disk, or Memory Stick).

The color of the pressed button is inverted.

4 Press [OK].

The popup window closes.

5 In the File >All menu, press [All Save].

A confirmation window appears asking if you want to execute the save.

6 Press [Yes] in the confirmation window to execute the save, or [No] to cancel it.

If you pressed [Yes], the save begins and a window opens to show its progress.

Note that all existing files in the save destination are deleted before the save starts.

To cancel a save after it has started

Press [Cancel] in the progress window, and press [OK] in the message box which appears to inform you that the save has been cancelled.

Loading All Data at Once

You can load the data of all categories saved in files to registers in a single operation.

Note

Data cannot be loaded from files created or saved on systems other than the MFS-2000.

1 Carry out steps 1 to 4 in “Saving All Data at Once” (see page 137), to select the type of media storing the data you want to load.

2 In the File >All menu, press [All Load].

A confirmation window appears asking if you want to execute the load.

3 Press [Yes] in the confirmation window to execute the load, or [No] to cancel it.

If you pressed [Yes], the load begins and a window opens to show its progress.

Note that all existing data in the load destination registers are deleted before the load starts.

To cancel a load after it has started

Press [Cancel] in the progress window, and press [OK] in the message box which appears to inform you that the save has been cancelled.

Deleting All Data at Once

You can delete the data of all categories saved in files in a single operation.

1 Carry out steps 1 to 4 of “Saving All Data at Once” (see page 137), to select the type of media storing the data you want to delete.

2 In the File >All menu, press [All Delete].

A confirmation window appears asking if you want to execute the deletion.

3 Press [Yes] in the confirmation window to execute the deletion, or [No] to cancel it.

If you pressed [Yes], the deletion begins and a window opens to show its progress.

To cancel the data deletion after it has started Press [Cancel] in the progress window, and press [OK] in the message box which appears to inform you that the deletion has been cancelled.

138 Batch Operating on Data Files