Sony MKS-2010, MKS-2015, MKS-2017 To mask part of the luminance processing, Tint:, Y Modify:, Tint mode:, Color Modify:, Color modify mode:, [Bound Soft] parameters:, [Bound Level] parameters:

Operations Advanced 6 Chapter

Tint: Add a specified color to the original video signal.

Color Modify: Adjust the original video signal.

Y Modify: Adjust the output levels of the input luminance signal.

4 If you selected [Tint] or [Color Modify], proceed to step 5. If you selected [Y Modify], adjust the following parameters.

	Knob	Description				Setting values
	1 (White)	White balance				0.00 to 200.00
	2 (Black)	Black balance				–100.00 to +100.00
	3 (Y Lift)	Curvature of				–100.00 to +100.00
		luminance level
		curve
	4 (Y Dark)	Position of maximum				–7.30 to +109.58
		point of luminance
		level curve
Output signal			Output signal
			luminance
luminance
			level
level
					Y Lift
		White
		balance
		adjustment
				Y Dark		Input signal
	Input signal
						luminance level
	luminance
Black balance level						Signal before
adjustment						adjustment

Signal after adjustment

5 Press [Bound Level] or [Bound Soft], and make settings for the three regions (Dark, Middle, Bright).

[Bound Level] parameters:

Set the boundaries of the three regions.

Knob		Description	Setting values
1	(Over B Lvl)	Luminance level at	50.00 to 150.00
		upper limit of Bright
		region
2	(Mid B Lvl)	Luminance level at	10.00 to 120.00
		boundary between
		Bright and Middle
		regions
3	(D Mid Lvl)	Luminance level at	–20.00 to +90.00
		boundary between
		Middle and Dark
		regions

Knob	Description	Setting values
4 (Under D Lvl)	Luminance level at	–50.00 to +50.00
	lower limit of Dark
	region

[Bound Soft] parameters:

Set the degree of boundary softness of the three regions.

Knob		Description	Setting values
1	(Over B Soft)	Degree of softness	15.00 to 70.00
		at upper limit of
		Bright region
2	(Mid B Soft)	Degree of softness	15.00 to 42.50
		at boundary
		between Bright and
		Middle regions
3	(D Mid Soft)	Degree of softness	15.00 to 42.50
		at boundary
		between Middle
		and Dark regions
4	(Under D Soft)	Degree of softness	15.00 to 70.00
		at lower limit of
		Dark region

6 Press [Dark], [Middle], or [Bright] to select a region, then adjust the following parameters.

Tint mode:

Knob		Description	Setting values
1	(Lum)	Luminance	–100.00 to +100.00
2	(Sat)	Saturation	0.00 to 100.00
3	(Hue)	Hue	359.99 to 0.00

Color modify mode:

Knob		Description	Setting values
1	(Lum)	Luminance	–100.00 to +100.00
2	(C Gain)	C signal gain	0.00 to 200.00
3	(Hue Delay)	Hue delay	–180.00 to +180.00

To return luminance processing parameters to their default settings

Press [Unity].

To mask part of the luminance processing

Press [Mask] in the Luminance Process menu, turning it on. Then proceed as explained in “To mask part of the primary color correction” (see page 114).

116 Color Correction