Operations File 7 Chapter

If you pressed [Yes], the load begins and a window opens to show its progress.

Note that all existing data in the load destination registers are deleted before the load starts.

To cancel a load after it has started

Press [Cancel] in the progress window, and press [OK] in the message box which appears to inform you that the save has been cancelled.

Deleting the Data of Selected Categories

You can delete the data for one or more categories saved in files in a single operation.

1 Carry out steps 1 to 7 of “Saving the Data of Selected Categories” (see page 139), to select the target categories and the type of media storing the data you want to delete.

2 In the File >All (Selected) menu, press [Delete].

A confirmation window appears asking if you want to execute the deletion.

3 Press [Yes] in the confirmation window to execute the deletion, or [No] to cancel it.

If you pressed [Yes], the deletion begins and a window opens to show its progress.

To cancel the data deletion after it has started

Press [Cancel] in the progress window, and press [OK] in the message box which appears to inform you that the deletion has been cancelled.

Operating on Individual Data Files

You can save, load, delete, rename, and copy files containing frame memory image data.

Loading Data Files

Proceed as follows to load files containing frame memory image data to registers.

1 From the top menu, select File >Load.

The Load menu appears.

The media, directory, files, and registers used in the previous load operation appear in the status area.

2 Select the Frame Memory category, and as required the target media.

For details about the procedure, see “Common Operations – Selecting the Frame Memory Category and the Target Media” (page 144).

3 In the File >Load menu, press [Source File].

A file list appears in a popup window.

4 Do one of the following to select the files to load.

•Press directly on the list in the popup window.

•Use the arrow buttons to scroll the reverse video cursor.

•Turn the knobs.

Knob

Description

Setting values

 

 

 

 

1

(Start File)

Number of first file to

1 and upwards

 

 

load

 

 

 

 

 

2

(Number)

Number of files to load

1 and upwards

 

 

 

 

5 When you are finished selecting files, press [OK].

140 Operating on Individual Data Files