Settings System 9 Chapter

The Manual Install menu appears.

2 Press [Refresh].

This loads the data from the “Memory Stick,” and the status area shows the abbreviation for each application, and the version, name, and install settings ([On]/[Off]) for the software/firmware constituting the application. If there are no communications with an application in the menu, the application box is grayed out.

If there is no data for an application to be installed in the “Memory Stick”

A dialog box appears.

Press [OK] to close the dialog box.

3 Select the software/firmware.

•Press directry on the list in the status area.

•Use the arrow buttons to scroll the reverse video cursor.

•Turn the knob.

Knob

Setting

Values

 

 

 

1 (No)

Software/firmware

1 and upwards a)

 

selection

 

 

 

 

a) The maximum value depends on application.

4 Press [Install], turning it on, to install the software/ firmware selected in step 3, or turnint it off, not to install.

5 Repeat steps 3 and 4.

6 Press [Execute].

A confirmation message appears, prompting whether or not to carry out the installation.

7 Press [Yes] in the dialog box.

This installs the software/firmware for which [On] is set.

Note

Never power off during the installation. If you power off during the installation, the particular device may not be able to be restarted.

To cancel the installation Press [No] in the dialog box.

If you have pressed [Yes] to begin the installation, press [Cancel] in the progress bar.

If an error occurs

A message appears, indicating what the error is. Check the message, and press [OK] to close the message dialog box.

When the installation finishes, the indication in the [Install] column changes as follows.

If the installation completes normally: [OK] appears.

If an error occurred: [Error] appears.

Entering an Installation Key (License Menu)

To use software options (referred to as “options”), installation keys are required. An installation key is a password (16 alphanumeric characters) issued for each option of each application. In the MFS-2000 system, installation keys are issued for the following options.

Application

Model number

Product name

 

 

 

SWR (switcher)

BZS-2000M

Switcher Upgrade

 

 

Software (Multi)

 

 

 

 

BZS-2440M

Frame Memory

 

 

Upgrade Software

 

 

(Multi)

 

 

 

DME

BZS-2470M

DME Upgrade

 

 

Software (Multi)

 

 

 

PNL (control

BZS-8050

Editing Control

panel)

 

Software

 

 

 

To activate an option you want to use, you need to enter the installation key in the License menu.

To purchase an installation key requires the device ID (string of up to 17 alphanumeric characters). You can check the device ID in the License menu.

For details of purchasing an installation key, contact your Sony sales representative.

Checking the unique device ID

1 From the top menu, select Setup/Diag >Info/Install >Licence.

The License menu appears.

162 Installing Software