PRINT SETTINGS SCREEN

When a file is stored in the machine, the print settings that were in effect when the file was printed from the printer driver are also stored. However, the settings below can be changed when you print a stored file.

For the procedures for operating the settings screen, see "USING THE OPERATION PANEL" (page 1-8)in "1. BEFORE USING THE MACHINE".

(1)

(2)

(3)

(4)

(5)

(6)

(1)[Print and Delete] key

Printing begins when this key is selected. When printing is finished, the file will be automatically deleted.

(2)[Print and Save] key

Printing begins when this key is selected. The file will not be deleted after printing.

(3)[Paper Select] key

Use this key to select the paper tray from which paper is fed.

(4)[Copies] key

Use this key to set the number of copies.

(5)[2-Sided Print] key

Use this key to select the orientation of the image on the reverse side of the paper for 2-sided printing. To have the front and back images oriented in the same direction, select the [2-Sided Booklet] key. To have the front and back images oriented opposite to each other, select the [2-Sided Tablet] key. Note that the size and orientation of the saved image may cause these keys to have the opposite effect.

Select the [Off] key when you only wish to print on one side of the paper.

(6)[Output] key

Use this key to select Sort, Group, Staple Sort* or Offset*.

*When a finisher is installed.

2-59