GENERAL PROBLEMS
PROBLEMS RELATED TO MACHINE OPERATION
• Specified machine functions cannot be
• The operation panel cannot be
• Printing is not possible or stops during a
• The displayed bypass tray paper size is not
PROBLEMS RELATED TO PAPER FEEDING AND OUTPUT
• The paper
• Paper does not feed from the paper
• The image on paper is
PROBLEMS RELATED TO QUALITY / PRINT RESULTS
• Lines appear in the printed
• Smudges appear on printed
• Toner does not adhere well or creases appear in the
• Print quality is
• Part of the image is cut
• Printing takes place on the wrong side of the
• A cover or insert is not printed on the specified
PROBLEMS RELATED TO PERIPHERAL DEVICES
• The connected USB device cannot be
• The connected USB memory cannot be
• The finisher does not
• Stapling does not take
• Output does not collect neatly in the output tray of the
• Stapled output does not collect
•Preview images or thumbnail images do not
•The display screen is difficult to
• You were logged out without having performed logout
• You forgot the administrator
• The actuator came off (when a finisher is not
If you are unable to solve a problem using the solutions in this manual, switch off the [POWER] key ( ) and the main power switch. Wait at least 10 seconds, and then switch on the main power switch and the [POWER] key ( ) in that order.
Caution:
When the DATA indicator is lit or blinking, do not switch off the main power switch or unplug the power plug. This may damage the hard drive or cause the data being stored or received to be lost.