PRINTING ON ENVELOPES

The bypass tray can be used to print on special media such as envelopes. The procedure for printing on an envelope from the printer driver properties screen is described below.

For the types of paper that can be used in the bypass tray, see "IMPORTANT POINTS ABOUT PAPER" (page 1-37)in "BEFORE USING THE MACHINE". For the procedure for loading paper in the bypass tray, see "LOADING PAPER IN THE BYPASS TRAY" (page 1-42)in "1. BEFORE USING THE MACHINE".

Select the envelope size in the appropriate settings of the application ("Page Settings" in many applications) and then perform the following steps.

(1)

(2)

(3)

(1)

Click the [Paper] tab.

 

 

 

 

 

 

(2)

Select the envelope size from the "Paper

 

 

 

 

 

 

 

 

 

Size" menu.

 

 

 

 

(3)

Select [Bypass Tray] from the "Paper

 

 

 

 

 

Source" menu of "Paper Selection".

 

 

 

 

(4)

Select [Envelope] from the "Paper Type"

 

 

 

 

 

menu.

 

 

 

 

 

Set the paper type of the bypass tray to [Envelope] and

 

 

 

 

 

make sure the envelope is loaded in the bypass tray.

 

 

 

 

(4)

 

• It is recommended that you do a test print to check the print result before using an envelope.

• In the case of media that can only be loaded in a certain orientation such as an envelope, you can rotate the image 180 degrees if needed. For more information, see "ROTATING THE PRINT IMAGE 180 DEGREES (Rotate 180 degrees)" (page 2-37).

• For more information on "Paper Selection", see "SELECTING THE PAPER" (page 2-6).

2-7