Open the main charger cover.
(1) Turn the main charger cover lock levers in the direction of an arrow below.
When the lock levers are horizontal, the lock is released.
3
(2) Grasp the lock levers and tip the cover forward.
(3)
(2)
(2)
4
Roller
Remove the developer cartridge.
(1)Grasp the developer cartridge lock and pull it forward and down.
(2)Squeeze the lever on the developer cartridge
(3)Pull the developer cartridge out horizontally.
(4)Support the developer cartridge near the middle with your hand and completely remove the developer cartridge.
•When removing the developer cartridge, grasp it with both hands at the middle.
•Try to keep the developer cartridge horizontal as you remove it. If tipped during removal, developer may spill out.
•There will be toner on the roller area of the removed developer cartridge. Do not touch the roller area. If you accidentally touch the toner, immediately wash your hands.
•Place the old developer cartridge in the bag that contained the new developer cartridge, seal the bag, and place it in the box.