Sony MZ-N910 To start/stop recording in sync with the sound source (Synchro-recording), REC, disc, group, Jog dial, Disc name, Disc name, Track name, Numbers of

On the remote control1 Press DISPLAY.Each time you press the button, the display changes as follows.Display window on the remote control

DE

Display: D/E

D	E
Track number	Elapsed time
Track number	Track name
Numbers of	Group name
tracks in the
group
Numbers of	Disc name
tracks in the
disc
Track number	Disc name
Track number	Indication of the
	selected sound mode
—	Current time

Note

Depending on the group settings, the operating conditions, and the disc settings, you may not be able to select certain indications or the indications may appear differently.

z

If you want to check the playing position or track name while playing, see “Viewing various information” (page 32).

To start/stop recording in sync with the sound source (Synchro-recording)

During synchro-recording, the starting and stopping of recording occurs are synchronized with the sound source. This simplifies digital recordings (e.g., from a CD player) since the need to operate the recorder or the sound source is eliminated. Synchro-recording is only possible with the optical cable connected.

Jog dial

REC

1 Make connections.

Use the appropriate optical cable to suit the source equipment. For details, see “Optional accessories” (page 75).

2 While the recorder is stopped, press the jog dial.

3 Turn the jog dial until “REC SET” appears in the display, and then press the jog dial.

4 Turn the jog dial until “SYNC REC” appears in the display, and then press the jog dial.

5 Turn the jog dial until “SYNC ON” appears in the display, and then press the jog dial.

6 Press and slide REC.

“REC” and the REC LED on the recorder light up in the display and the recorder stands by for recording.

26