Sony MZ-N910 Select “NORMAL”, Select “DEFAULT”, 2 Select “REVERSE”, Select “From Here”, 2 Select “From End”, 2 Select “PowerSave”, To turn the setting to normal

Changing the operational direction of the display

When you turn the jog dial downward, the display scrolls downward. This is the factory setting. You can change the factory setting to scroll in the opposite direction.

This function can be set with the recorder only.

1 Enter the menu and select “OPTION” - “JOG DIAL”.2 Select “REVERSE”.To turn the setting to normalSelect “DEFAULT”.Preserving battery power (Power Save Mode)

This function allows you to maximize the operating life of the battery when playing the recorder with headphones/earphones (with a remote control) or a line cable connected to the i/LINE OUT jack. Power consumption is reduced by turning off the display when no operation has been made for a while.

1 Enter the menu and select “OPTION” - “PowerMode”.2 Select “PowerSave”.

To turn the setting to normal

Select “NORMAL”.

Recording without overwriting existing material

If you wish to avoid recording over the current contents of an MD, do the following procedure. All new material will then be recorded from the end of the current contents. The recorder is factory set to record over existing material.

This function can be set with the recorder only.

1 Enter the menu and select “OPTION” - “REC-Posi”.2 Select “From End”.To start recording over the current contentsSelect “From Here”.

z

•To temporarily record without recording over the current contents, press END SEARCH before the start of recording. The recording will begin after the last track, even if “REC- Posi” is set to “From Here” (factory setting). The remaining recordable time on the disc will appear in the display when you press

END SEARCH.

•If the group recording setting (“ : REC”) is

set to “ : REC ON”, the recorder will not overwrite existing materials.

59