Symptom

Cause/Remedy

 

 

The recorder does

• The disc is damaged or does not contain proper recording or

not work or works

editing data.

poorly.

, Reinsert the disc. Rerecord the disc. If the error message still

 

appears, replace it with another disc.

 

• There is an internal malfunction in the system.

 

, Remove the dedicated USB cable from the recorder, restart

 

your computer, and then connect the cable to the recorder

 

again.

 

• While operating, the recorder received a mechanical shock, too

 

much static, abnormal power voltage caused by lightning, etc.

 

, Restart the operation as follows.

 

1 Disconnect all the power sources.

 

2 Leave the recorder for about 30 seconds.

 

3 Connect the power source.

 

 

The clock does not

• The recorder was disconnected from the power source for 3

work correctly, the

minutes or more, causing the clock to return to its factory setting.

clock does not

, Charge the rechargeable battery, and then set the clock again.

appear, or time and

• The clock is not set.

date stamping did

, Set the clock (page 58).

not occur when

• Time and date will not be stamped on tracks which are checked out

recording.

from a computer.

 

 

 

During playback,

• Power save mode is activated.

the display on the

, In power save mode, the display on the remote control turns on

remote control

whenever the remote control is operated, but not when the

does not turn on.

controls on the recorder are operated. (The exception is when

 

the GROUP button on the recorder is pressed.)

 

 

The display

• The recorder was disconnected from the power source.

window is not

, Let the recorder sit for a while, or disconnect the power source,

normal.

reconnect it, and then press any of the operation buttons.

 

 

When using with

• This is due to the MiniDisc system limitation. The recorder turns

the AC power

off 3 minutes after the recorder has stopped in order to allow the

adaptor, the display

charging time on the dedicated USB cradle to be calculated.

window of the

 

recorder will

 

remain faintly lit

 

for some time even

 

after the recorder is

 

stopped.

 

 

 

The playing time of

This is due to a calculation discrepancy between the recorder and

a checked-out track

the computer.

is different from

 

the time that

 

appears on your

 

computer monitor.

 

 

 

84