Sony MZ-N910 Others, While using group function

While using group function

Symptom	Cause/Remedy
The group	• While using a disc without group setting, an attempt was made to
function does not	select some group-related menu.
operate.	, Use a disc with group setting.
A track cannot be	• This is due to the MiniDisc system limitations. Group information
recorded to a new	has been written to the area where the disc name is stored. The disc
group. A new	name and track names are recorded in the same area, which can
group cannot be	store a maximum of approximately 1,700 characters. If the total
created.	number exceeds this amount, a new group cannot be created even
	though group mode is on. It is also impossible to make group
	settings at this time.

Others

Symptom	Cause/Remedy
The recorder does	• The rechargeable battery is not charged.
not work or works	, Charge the rechargeable battery.
poorly.	• The volume is low.
	, Turn up the volume.
	• No disc is inserted.
	, Insert a recorded disc.
	• The HOLD function is turned on (“HOLD” appears in the display
	when you press an operation button on the recorder).
	, On the recorder, disable HOLD by sliding the HOLD switch to
	the opposite direction of the arrow (pages 12, 17).
	• The lid is not firmly closed.
	, Close the lid until it clicks. Then slide OPEN to open the lid.
	• Moisture has condensed inside the recorder.
	, Take the MD out and leave the recorder in a warm place for
	several hours until the moisture evaporates.
	• The AC power adaptor is not firmly connected.
	, Connect the AC power adaptor firmly to the DC IN 3V jack on
	the recorder or the battery charging stand and to the house
	current.
	• The rechargeable battery or dry battery is weak (“LOW BATT”
	flashes or nothing appears).
	, Charge the rechargeable battery or replace the dry battery with
	a new one (page 16), or use the supplied AC power adaptor.
	• The dry battery have been inserted incorrectly.
	, Insert the battery correctly (page 17).

83