Sony MZ-N910 Notes, •On the recorder, Select “BEEP ON”, 2 Select “BEEP OFF”, •On the remote control, To turn on the beep sound, Turning off the beep sound

Setting the clock to stamp the recorded time

To stamp the date and time on the MD when you record, you first need to set the clock. Once you set the clock, the recorder will include a time stamp each time you record something. The recording date is not recorded for tracks that are checked out from your computer.

This function can be set with the recorder only.

1 When the recorder is stopped, enter the menu and select “OPTION” - “CLOCK SET”.

The digits of the year flash.2 Change the current year by turning the jog dial, and then press the jog dial.The digit of the month flashes.

3 Repeat step 2 to enter the current month, date, hour, and minute. When you press the jog dial to enter the minute, the clock starts operating.

If you make a mistake while setting the clock

Press . to go back to the wrongly entered item, and then enter the correct value. You can skip a step by pressing

>.

To display the current time•On the recorder

While the recorder is stopped or recording, enter the menu, and select “DISPLAY” - “Clock”.

•On the remote controlWhile the recorder is stopped or recording, press DISPLAY repeatedly.To display the time in the 24- hour system

While setting the clock, press T MARK. To display the time in the 12-hour system, press T MARK again.

To maintain the correct time

Once you set the clock, it will keep correct time as long as the recorder is connected to a power source, such as the charged rechargeable rechargeable battery, alkaline dry battery, or AC power adaptor. However, if no power source is connected, the clock setting will change back to the factory setting after about 3 minutes. When changing the alkaline dry battery, make sure to do it within 3 minutes.

Notes

•Make sure the time is correctly set if you want the time stamp to be accurately recorded for an important recording.

•Under normal conditions, the clock may vary by about plus or minus 3 minutes per month.

Turning off the beep soundYou can turn off/on the beep sound on the recorder and the remote control.1 Enter the menu and select “OPTION” - “BEEP”.2 Select “BEEP OFF”.To turn on the beep soundSelect “BEEP ON”.

58