Sony MZ-N910 OFF, AUTO, disc, track, Display, Setting, : Name”, : Name”, Functions, Operation, few seconds, Labeling (Name), When labeling a, When labeling a

Turning on/off the backlight

The backlight of the display window of the remote control can be set to remain on or off.

This function can be set with the remote control only.

1 While the recorder is stopped, enter the menu and select “OPTION” - “BACKLIGHT”.

2 Select the desired item.

Display	Setting
AUTO	The backlight lights when
	you operate the recorder or
	the remote control, and
	automatically turns off when
	no operation is made for a
	few seconds.
ON	The backlight lights when
	the recorder is operating.
OFF	The backlight stays off.

Adjusting the contrast of the display window(Contrast Adjustment)You can adjust the contrast of the display window on the recorder.

This function can be set with the recorder only.

1 While the recorder is stopped, enter the menu and select “OPTION” - “CONTRAST”.

2 Turn the jog dial to adjust the contrast, and then press the jog dial to enter the selection.

Note

You cannot adjust the contrast with the remote control, nor can you adjust the contrast of the display on the remote control.

Labeling (Name)1 Enter the menu and select “EDIT” - “Name”.2 Select one of the following.

When labeling a	“	: Name”
track
When labeling a	“	: Name”
disc

3 Turn the volume control repeatedly to select a letter and press the jog lever to enter.

The selected letter stops flashing and the cursor moves to the next input position.

The cursor flashes at the next input position.

The buttons and control used for character input and their functions are listed below.

Functions	Operation
To move the cursor to	Slide the jog lever
the left or right.	(., >)
To change the letter to	Turn the volume
the one before/next	control (VOL+, –).
one.
To enter a letter.	Press the jog lever
	(NX/ENT).
To enter a name.	Press the jog lever
	for 2 seconds or
	more (NX/ENT).
To switch between	Press P MODE/ .
capital letters, small
letters, and numbers/
marks.

To insert a blank space. Press +.

To delete a letter.	Press	–.
To cancel labeling.	Press x for 2
	seconds or more.
		continued

65