Sony MZ-N910 disc, time, skips, static, (page 68), first track, An MD is not, An MD is not, the remaining, maximum track, While playing, Playback sound, with operation

Symptom	Cause/Remedy
You cannot check out	• The minimum recordable time on a disc is normally 2 seconds
tracks that will fill up	in stereo, 4 seconds in LP2 stereo mode, and 8 seconds in LP4
the remaining	stereo mode. When you check out a track from your computer,
recording time on the	the recorder needs a 2-second (or 4- or 8-second) space for a
disc.	track even if the track is under 2 seconds (or 4 or 8 seconds) in
	length. Also, the recorder inserts a 2-second (or 4 -or 8-second)
	space in between tracks during check out so as not to overwrite
	the previous track by mistake. For this reason, the recorder
	needs an additional 6 seconds (or 12 or 24 seconds) for each
	track. This reduces the maximum recording time for each track
	by 6 seconds (or 12 or 24 seconds) during check out.
“TR FULL” appears	• This is due to the MiniDisc system limitation. Repeated
even before the disc	recording and erasing may cause fragmentation and scattering
has reached the	of data. Although those scattered data can be read, each
maximum track	fragment is counted as a track. In this case, the number of
number or recording	tracks may reach 254 and further recording is not possible.
time.	, To continue recording, erase unnecessary tracks.

While playing

Symptom	Cause/Remedy
An MD is not	• Repeat play is selected.
played normally.	, Use the jog dial on the recorder or press P MODE/ on the
	remote control to change back to the normal play (page 32).

•Playback mode is changed.

,Use the jog dial on the recorder or press P MODE/ on the remote control to change back to the normal play (page 32).

An MD is not	• Disc playing stopped before it came to the last track.
played from the	, Press N on the recorder or press the jog lever (NX) on the
first track.	remote control for 2 seconds or more to start playing.
	• The disc information has been stored to the Personal Disc Memory.
	, Erase the disc information from the Personal Disc Memory
	(page 68).
Playback sound	• The recorder is placed where it receives continuous vibration.
skips.	, Put the recorder on a stable place.
	• A very short track may cause sound to skip.
	, Try not to create a short track.
Sound has a lot of	• Strong magnetism from a television or such device is interfering
static.	with operation.
	, Move the recorder away from the source of strong magnetism.

80