Error message

Meaning/Remedy

 

 

NO SET

• You tried to set Digital Pitch Control while the “AUDIO OUT”

 

parameter was set to “LINE OUT”.

 

, Use the jog dial to set the “AUDIO OUT” parameter to

 

“HeadPhone”.

 

• You tried to make the following settings while recording.

 

— Personal Disc Memory

 

— Melody Timer

 

— Digital Pitch Control

 

— Recording mode

 

— Recording level

 

— Selection of “ : REC” in menu

 

— Selection of “REC-Posi” during recording to a group.

 

 

 

NoOPERATE

• You pressed

+ or – while programming a track using the

 

remote control.

 

 

• You tried to make the Auto Time Mark setting while recording

 

through digital connection.

 

• You tried to press X or T MARK during synchro-recording.

 

 

NO SIGNAL

• The recorder could not detect digital input signals.

 

, Make sure that the source is connected firmly (page 20).

 

 

P/B ONLY

• You tried to record or edit on a pre mastered MD (P/B stands for

 

“playback”).

 

 

, Insert a recordable MD.

 

 

PROTECTED

• You tried to record or edit on a MD with the tab in the record-

 

protect position.

 

 

, Slide the tab back (page 74).

 

 

Push STOP

• You tried to open the lid while the recorder was storing disc

 

information.

 

 

, Open the lid only after pressing x and “TOC Edit” has

 

disappeared from the display.

 

 

READ ERR

• The recorder cannot read the disc information correctly.

 

, Reinsert the disc.

 

 

REC ERR

• Recording was not correctly done.

 

, Place the recorder at a place with no vibrations and record

 

again.

 

 

• The disc is soiled with an oil film or finger prints, is scratched, or

 

is not a standard disc.

 

, Try recording again with another disc.

 

 

Rehearsal

• You tried to operate a button and or a lever (other than the control)

 

on the remote control while the recorder is performing rehearsal

 

play during a track division operation.

 

 

 

87