Sony MZ-N910 Press, 2 Press, To erase a group, 3 Press the jog dial, Press x for 2 seconds or more, You can erase tracks in a selected group

Changing the order of a group on a disc (Group Move)

5-way control key (., >)

Jog dial

1 While playing a track within a group whose order you want to change, press the jog dial.

2 Turn the dial until “EDIT” appears in the display, and then press the jog dial.

3 Turn the jog dial until “Move” appears in the display, and then press the jog dial.

4 Turn the jog dial until “ : Move” appears in the display, and then press the jog dial.

The group number to which the currently playing track belongs appears in the middle section of the display. If the group has been labeled, press > to display the group name. Press . to return to the group number display.

Example: Moving the first group in the disc (Group01) to the position between the second (Group02) and the third (Group03) group.

5 Turn the jog dial to select the destination point on the disc, and then press the jog dial to enter the selection.

To cancel moving

Press x for 2 seconds or more.

To return the preceding setting

Press x.

For the remote control operation, see page 66.

To erase a groupYou can erase tracks in a selected group.

Note that once a recording has been erased, you cannot retrieve it. Be sure to check the contents of the group before you erase it.

Note

You cannot erase tracks that have been checked out from your computer. You cannot erase a group if it contains a checked-out track. In this case, check in the track or tracks to the computer.

Jog dial

x

1 Select a group you want to erase and check the contents (see “To cue to the start of a group (Group Skip)” (page 47)).

2 Press x.

3 Press the jog dial.

52