Sony MZ-N910 Editing recorded tracks, Before editing, Labeling a track or a disc (Name), •Numbers 0 to, Letter input area, Character palette, The cursor flashes

Editing recorded tracks

This section explains the operations that are done on the recorder. For details on operations done on the remote control, see the pages indicated for each operation.

Before editing

You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs.

Notes

•Premastered MDs cannot be edited.

•Close the record-protect tab on the side of the MD before editing

•When “TOC Edit” is flashing, the editing results are being recorded.

—Do not move or jog the recorder. —Do not disconnect the power source. —The lid becomes locked.

Labeling a track or a disc (Name)

You can name tracks and discs using the recorder’s character palette.

Note

To label a group, see page 50.

Available characters•Capital and small letters of the English alphabet•Numbers 0 to 9•! " # $ % & ( ) * . ; < = > ? @ _ ` + – ' , / : _ (space)Maximum number of characters per name

Track names, group names, and disc name: Approx. 200 each (containing a mixture of all available characters)

Maximum number of characters that can be input per disc

Alphanumeric characters and symbols only: Approx. 120 titles of about 10 characters each (a maximum of about 1,700 characters)

The number of titles that can be stored on a disc depends on the number of characters that are input for track names, group names, and disc name.

About the character palette

During operations on the recorder, characters can be selected from the character palette in the display.

The character palette has the following configulation.Letter input areaThe cursor flashes.Character palette

Since only a part of the character palette is visible on the display, use the control bar to move the cursor and enter characters.

Note

If you enter the symbol “//” between the characters in disc names such as “abc//def”, you may be unable to use the group function.

39