Sony MZ-N910 Press, Press, 2 Press, Jog dial, 3 Press the jog dial, To cancel the procedure, To cancel the operation, Labeling recorded groups, Releasing a group setting

5 Turn the jog dial until the number of the desired last track appears in the display, and then press the jog dial to enter the selection.

This selects the last track of the new group and the group can be labeled.

6 Label a group (see “Labeling recorded groups” (page 50)).

To cancel the procedure

Press x for 2 seconds or more.

To return the preceding setting

Press x.

Notes

•In step 4, the first track must be either the first track of an existing group or a track that does not belong to a group.

•When selecting the last track in step 5, make sure the track comes after the one selected in step 4. The last track must be either the last track of an existing group or a track that does not belong to a group.

For the remote control operation, see page 67.

Releasing a group setting

Jog dial

x

1 Select a group you want to release and check the contents (see “Playing a track in group play” (page 47)).

2 Press x.

3 Press the jog dial.

4 Turn the dial until “EDIT” appears in the display, and then press the jog dial.

5 Turn the jog dial until “ : Release” appears in the display, and press the jog dial.

“Release?” and “PushENTER” appear in the display.6 Press the jog dial to release a group.The group setting of the selected group is released.To cancel the operation

Press x for 2 seconds or more.

To return the setting one level before

Press x.

For the remote control operation, see page 67.

Labeling recorded groups

You can label a group while the recorder is recording or playing a track in the group. You can also label a group while a track in the group is selected and the recorder is stopped.

1 Do the procedure of “Labeling”(page 40) and select “ : Name” in step 4, and then do steps 5 to 8.

For the remote control operation, see page 66.

50