zVarious ways of recording

Recording in sync with the source player (Synchro-recording)

You can easily make digital recordings of a digital source on an MD.

Before synchro-recording, make connections to the digital source with a digital cable, and insert a recordable MD.

CD players, etc.

 

 

 

 

 

SYNCHRO REC

 

REC

 

 

 

 

 

INPUT

1 Set INPUT switch to ”OPT1” or ”OPT2”.

Set it to match the input jack connected to the source.

2 Slide SYNCHRO REC to ON. “SYNC” appears in the display.

SYNC

0%

50%

100%

LEFT

LEVEL –db 50 40 30 20 12 8 6 4 2 0

RIGHT

3 Press and slide REC to the right.

The recorder stands by for recording.

4 Play the source sound.

The recorder starts recording when it receives the playing sound.

To stop recording, press p.

z

•You cannot pause manually during synchro-recording.

•When there is no sound from the player for more than 3 seconds during synchro- recording, the recorder goes into the standby mode automatically. When the sound comes from the player again, the recorder resumes synchro-recording. If the recorder is kept in the standby mode for 5 minutes or longer, the recorder stops automatically.

Notes

•Do not switch SYNCHRO REC after step 2. Recording may not be done properly.

•When recording in monaural, follow steps 1 and 2 of “Recording in monaural for double the normal recording time” (page 14) before synchro-recording .

12-EN