Cancelling the last editing operation (UNDO)

You can undo the last perfomed editing operation and return to the previous status.

However, you cannot undo an editing operation if you have done any of the following afterwards:

slide the REC switch

turn off the power or remove the MD

remove the recorder from the station

leave both the recorder and the station unoperated for more than 5 minutes

remove the AC power adaptor from the wall outlet

1 Press UNDO during stop.

2 Press TITLE/ENTER.

”TOC EDIT” will appear for a few seconds and the MD will return to the previous status.

To cancel UNDO, press p.

Note

Once you have undone an editing operation, you cannot undo this undoing process itself to restore the original editing operation.

p UNDO

The following messages will appear according to the last performed editing operation.

Operation

Message

Erase a track

”Erase Undo OK?”

 

 

Erase all tracks

”All Erase Undo OK?”

Insert a track

”Track Mark ON Undo

mark

OK?”

 

 

Erase a track

”Track Mark OFF Undo

mark

OK?”

Move a track

”Move Undo OK?”

Name a disc

”Disc Name Undo OK?”

Name a track

”Track Name Undo

 

OK?”

 

 

31-EN