Sony MZ-R5ST zAdditional information, Precautions, 38-EN, Playback, Batteries, On safety, Recording2), Battery life1), On installation, On power sources, On heat build-up

Battery life1)

For longer recordings, we recommend using the recorder attached to the station.

Batteries	Recording2)	Playback
LIP-8 lithium ion	Approx.	Approx.
rechargeable	3.5 hours	5.5 hours
battery
Two LR6 (size	-----3)	Approx.
AA) Sony		9 hours
alkaline dry
batteries
LIP-8 + two LR6	-----3)	Approx.
(size AA)		16 hours

1)The battery life may be shorter due to operating conditions and the temperature of the location.

2)When you record, use a fully charged rechargeable battery.

3)Recording time may differ according to the alkaline batteries.

When to replace the batteries

When the dry batteries or rechargeable battery are weak, bor “LoBATT” flashes in the display of the recorder or the remote control. Replace the dry batteries or charge the rechargeable battery.

zAdditional information

Precautions

On safety

Do not put any foreign objects in the DC IN 9 V jack.

On power sources

•Use house current, lithium ion rechargeable battery or two LR6 (size AA) batteries.

•For use of the station: Use the AC power adaptor supplied with this unit. Do not use any other AC power adaptor since it may cause the station to malfunction.

Polarity of the plug

•The recorder is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the recorder itself has been turned off.

•If you are not going to use this recorder for a long time, be sure to disconnect the power supply (AC power adaptor, dry batteries, rechargeable battery, or car battery cord). To remove the AC power adaptor from the wall outlet, grasp the plug itself; never pull the cord.

On heat build-up

Heat may build up in the recorder if it is used for an extended period of time. In this case, leave the recorder turned off until it cools down.

On installation

•Never use the recorder where it will be subjected to extremes of light, temperature, moisture or vibration.

•Never wrap the recorder in anything when it is being used with the AC power adaptor. Heat build-up in the recorder may cause malfunction or damage.

38-EN