Sony MZ-R5ST Error Messages, 45-EN, control), Meaning/Remedy, Station (remote

Error Messages

If the following messages flash in the display window of the station or the remote control,

check the chart below. The display of the recorder will flashwhen a message is displayed on the station or the remote control.

Station (remote	Meaning/Remedy
control)
BLANK DISC	•An MD with no recording on it is inserted.
(BLANK)	b Insert a recorded MD.
CONNECTION	•The recorder is not attached to the station securely.
ERROR (—)	b Attach it securely.
DISC ERROR	•The recorder cannot read the disc (it‘s scratched or dirty).
(ERROR)	b Reinsert or replace the disc
DISC FULL (FULL)	•There is no more space to record on the disc (less than 12
	seconds available).
	b Replace the disc.

EDIT BUSY (BUSY) •You tried to operate the recorder while it was accessing the recorded data.

bWait until the message goes out (in rare cases, it may take 2–3 minutes).

— (LoBATT)	•Batteries are weak.
	b Charge the rechargeable battery/replace the dry batteries
	(pages 36, 37).

MEMORY OVER (MEMORY)

•You tried to record when there is no indication in the display, with the recorder placed where it receives continuous vibration.

bPut the recorder on a stable place, and start recording again.

NAME FULL	•You tried to enter more than 200 characters for a track or disc
	name or more than 1700 for the entire disc.
	b Enter the characters within the limit.
NO DIGITAL	•The recorder could not detect digital input signals.
SIGNAL (—)	b Make sure that the source is connected securely. Ignore
	when recording analogically.
NO DISC (No DISC)	•You tried to play or record with no disc in the recorder.
	b Insert an MD.

P/B ONLY (PbONLY) •You tried to record or edit a premastered MD (P/B stands for ”playback”.)

bInsert a recordable MD.

PROTECTED DISC	•You tried to record or edit on a MD with the tab in the record-
(SAVED)	protect position.
	b Slide the tab back.

45-EN