Sony MZ-R5ST zEditing recorded tracks, Erasing tracks (ERASE), REC, TITLE, ENTER, ERASE, 26-EN, Notes on editing, To erase a track, To erase the whole disc

zEditing recorded tracks

You can edit your recordings by adding/ erasing track marks or labeling tracks and MDs. Premastered MDs cannot be edited.

Notes on editing

•Do not move or jog the recorder while “Toc Edit”* is flashing in the display.

•You cannot edit tracks on an MD that is record-protected. Before editing tracks, close the tab on the side of the MD.

*TOC = Table of Contents

Erasing tracks (ERASE)

To erase a track

Make sure of the track you are erasing.

pERASE/ TITLE/ DELETE ENTER

1Press ERASE/DELETE while playing

the track you want to erase.

“Erase OK? nPush Enter” appears in the display, and the recorder plays the selected track repeatedly. To cancel erasing, press p.

2Check the track number in the display and press TITLE/ENTER. The track is erased from the MD and the remaining tracks are renumbered. The recorder will start to play the next track.

To erase a part of a track

Add track marks (page 27) at the beginning and the end of the part you want to erase, then erase the part.

To erase the whole disc

You can erase all the tracks and data of the MD at the same time.

Be sure to check the contents of the disc you want to erase.

p	REC	TITLE/
		ENTER
		ERASE/
		DELETE

1 In stop mode, keep pressing ERASE/ DELETE and press and slide REC to the right.

“All Erase OK ? nPush Enter” appears in the display. To cancel erasing, press p.

2 Press TITLE/ENTER.

”Toc Edit” flashes in the display. When the MD is erased, “BLANK DISC” appears.

26-EN