ON
TIMER 1
TIME:05
4 Turn the jog dial repeatedly to se the alarm sound.

Other operation

Suppressing the skips of the sound (G-PROTECTION)

The G-PROTECTION function was developed to provide a higher level of

shock resistance than that of existing The following sounds can be sele players in order to allow the recorder to be

used while jogging.

Display

Alarm sound

 

Note

TIMER 1

Classical music 1

 

 

 

TIMER 2

Classical music 2

 

The playback sound may skip if:

• the recorder receives stronger continuous

TIMER 3

Beeps

shock.

 

 

 

5 Press the jog dial.

• a dirty or scratched MiniDisc is played.

 

 

 

 

The alarm sound is set.

 

 

6 Turn the jog dial to select the ela

 

 

Using the alarm

time.

 

 

(Melody Timer)

You can set the alarm timer to go off in 1

ON

 

to 99 minutes and select three differentTIMER 1

alarm sounds.

TIME:05

 

 

On the recorder

Jog dial

One rotation of the control chang the elapsed time setting (TIME :) minute, within a range of 1 to 99 minutes. To change the time quic keep turning the jog dial.

7 Press the jog dial.

Melody timer is set.

The time remaining until the alar shown in the display while the recorder is stopped or play-pause

1 While the recorder is stopped,

 

To check the time remaining

playing, or play-paused, press the jog

dial.

on the alarm while playing

2 Turn the jog dial“Muntil-TIMER” flashes in the display, and press the dial.

3 Turn the jog dial“ON”untilflashes in the display, and then press the dial.

Follow steps 1 to 3 again. The remai time and the selected sound appear display.

To cancel setting the alarm Press CANCEL.

,lights up in the display and t alarm sound can be selected.

70