Sony NX80X manual Using “BRAVIA” Sync with Control for HDMI, BD/DVD Player, AV Amplifier

Using “BRAVIA” Sync with Control for HDMI

With the “Control for HDMI” function, “BRAVIA” Sync helps to communicate with “BRAVIA” Sync- compatible equipment using HDMI CEC (Consumer Electronics Control). Use the following settings and tips to help unify control of your connected equipment.

Press HOME, then select > Channels & Inputs > HDMI Settings > Control for HDMI > On.

“Control for HDMI” (“BRAVIA” Sync) is only available for the connected Sony equipment that has the “BRAVIA” Sync logo or is compatible with “Control for HDMI.”

The “Control for HDMI” settings must be set on both the TV and connected equipment. For settings on the connected equipment, refer to their instruction manuals.

When specific Sony equipment compatible with “Control for HDMI” (“BRAVIA” Sync) is connected, “BRAVIA” sync is automatically activated on the equipment.

Controlling “BRAVIA” Sync-Compatible Equipment

“BRAVIA” Sync-compatible equipment is listed as a new input source under (External Inputs) in the Home Menu. To control the equipment by using the remote control, press SYNC MENU and select the desired equipment from “HDMI Device Selection.”

BD/DVD Player

Automatically turns the “BRAVIA” Sync-compatible equipment on and switches the input to that equipment when you select it from the Home Menu or Sync Menu.

Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play.

Automatically turns the connected equipment off when you switch the TV to standby mode.

AV Amplifier

Automatically turns the connected AV amplifier on and switches the sound output from the TV speaker to the audio system when you turn the TV on. This function is only available if you have previously used the AV amplifier to output TV sound.

Automatically switches the sound output to the AV amplifier by turning the AV amplifier on when the TV is turned on.

Automatically turns the connected AV amplifier off when you switch the TV to standby mode.

Adjusts the volume (VOL +/-) and mutes the sound (MUTING) of the connected AV amplifier through the TV’s remote control.

52