Sony NX80X manual Service Only, VIDEO IN 2, COMPONENT IN 1080p/1080i/720p/480p/480i

Channel (ARC) technology, use the HDMI IN 1 on the rear of the TV. If not, an additional connection with DIGITAL AUDIO OUT (OPTICAL) is necessary.

If the equipment has a DVI jack, connect it to the HDMI IN 2 through a DVI

-HDMI adapter interface (not supplied), and connect the equipment’s audio out jacks to the PC/HDMI 2 AUDIO IN which is located in the PC IN.

SERVICE ONLY

This port is only for service.

VIDEO IN 2, COMPONENT IN (1080p/1080i/720p/480p/480i)

This input can be used as a composite video input or as a component video input.

For composite use, connect to VIDEO IN 2 for video, and to AUDIO (L/R) of COMPONENT IN for audio signals.

For component connection, use Y, PB, PR for video signals and also connect to AUDIO (L/R) for audio signals.

The TV will automatically detect and switch between VIDEO IN 2 and COMPONENT IN. To manually set the input type, press HOME, select > Channels & Inputs > Video 2/Component Selection.

Return to Top

Copyright 2010 Sony Corporation

86