Standby Mode Function

To save power, the Communication Terminal will enter standby mode if you do not operate it for a specified period of time.

When the Communication Terminal is in standby mode, the POWER indicator lights in orange. Once the Communication Terminal receives a call, the standby mode is automatically released.

To release the standby mode

Press the @/1 button on the Remote Commander.

To specify the standby time

Specify the time that you want the system to remain on before entering into standby mode (1 to 99 minutes) by selecting “Device Setup” on the General Setup menu, and then setting “Standby Time”. If you do not want the system to enter the standby mode, set “Standby Mode” to “Off”.

For the “Standby Time” and “Standby Mode” settings, see “General Setup Menu” on page 53.

Notes

•The POWER indicator on the camera goes off when the system enters standby mode.

•If you use a Sony TV monitor with the IR repeater installed under the remote sensor, the TV monitor will enter standby mode together with the Communication Terminal.

Turning the System On/Off 29