Launcher menu

 

 

Phone Book

Tokyo

 

Detail Dial

 

 

History

New York

 

Menu

IP:

012.345.678.678

Information

ISDN:

012345678956789

 

Paris

 

 

AUTO

 

Dial

Enter the remote party number.

Notes

After the power is turned on, the camera moves automatically for trial operation. Be careful not to catch your finger.

If you use force to prevent the camera moving, it may not resume moving and not output a signal to the Communication Terminal. In this case, turn off the terminal, and turn it on again.

When you turn on the power of the Communication Terminal for the first time after installation, the setup wizard will appear after the self-diagnosis is completed. Set up your system following the wizard.

For setups using the wizard, see “Setting Up the System for the First Time

— Initial Setup Wizard” on page 33.

Used with an optional device especially designed for use with this system, such as the Data Solution Box or ISDN Unit, for the first time, the Communication Terminal may automatically upgrade the software of the connected device. While the upgrading message is displayed on the monitor screen, be sure not to turn off the Communication Terminal. Doing so may cause malfunction of the system. System malfunction may also occur when a system power-off has been caused by an accidental problem such as a power interruption during upgrading. If connection of the Data Solution Box or ISDN Unit to the Communication Terminal is not re-established even after the system power is recovered, consult a Sony dealer.

28 Turning the System On/Off