System Configuration via a LAN and ISDN for Multipoint Data Conference

Installing the optional PCSA-M3G70 H.323 MCU software, the PCS-M0G70 H.320 MCU software, and using the optional Data Solution Box PCS-DSB1S and ISDN Units PCSA-B384S, PCSA-B768S, or PCSA-PRI enables you to conduct multipoint mixed LAN and ISDN line multipoint data conferences. Two Communication Terminals where the MCU software is installed must be connected via a LAN in this configuration.

This allows you:

•To hold a multipoint videoconference among up to six sites over ISDN.

•To show still images stored on a “Memory Stick”.

•To use data from a computer or other such peripheral device in the videoconference.

•To show still images or computer data on the second monitor or projector used as the display device.

•To connect up to five external microphones to the Data Solution Box, allowing you to hear several participants.

System configuration

*

1PCS-PG70/PG70P Communication Terminal

2 PCSA-CG70/CG70P Camera Unit

3 PCS-RG70 Remote Commander

4 TV monitor (not supplied)

5 PCSA-M3G70 H.323 MCU software (not supplied)

6 PCSA-DSB1S Data Solution Box (not supplied)

7 PCS-A1 Microphone (not supplied)

8 PCSA-M0G70 H.320 MCU software (not supplied) 9 PCSA-B384S, PCSA-B768S or PCSA-PRI ISDN

Unit (not supplied)

*

*

Be sure to connect two Communication Terminals, with the MCU software installed, via a LAN.

The illustration shows an example using the PCSA-B768S ISDN Unit.

22 System Configuration