RGB B: Select the picture from the computer connected to the RGB IN B connector.

Video Input Select

Local1

 

Local2

 

Split

 

Far

 

DSB Input

 

 

 

 

 

 

 

 

 

Main

 

Main

 

Off

 

 

 

RGB A

 

 

 

 

 

 

 

 

 

3 Press the PUSH ENTER button on the Remote Commander.

The indicator of the RGB A or RGB B button on the upper panel of the Data Solution Box lights according to the selected input.

Note

Even if you select the input with the buttons on the Data Solution Box, the display in the Video Input Select menu will not change.

To transmit a picture from a computer connected to the Data Solution Box

Press the SEND button on the upper panel of the Data Solution Box. The indicator on the SEND button lights and the picture of the equipment selected with the RGB A or RGB B button or the VIDEO INPUT SELECT button is displayed on the projector, etc. connected to the RGB OUT connector on the Data Solution Box. While in communication, the picture selected on the Data Solution Box is transmitted to the remote party simultaneously.

Such computer picture is displayed without any conversion as input to the Data Solution Box. The detailed portion of the picture transmitted to the remote party may not be clearly seen and the number of frames may be reduced.

For details on picture quality, see “Picture quality of the data solution box” on page 148.

For picture transmission using the Remote Commander, see page 121.

SEND button

Using Audio/Video Signal from the Connected Equipment for a Conference 147