Note
When you set “Number of Lines” to “2B”, you can connect to the remote party by selecting “ISDN (2B)” from “Line I/F” in the Detail Dial menu.
To set up more detailed optionsWhen “More Options Enable” is set to “On” in the Dial Setup menu, the More Options button is shown at the lower part of the List Edit menu.
Select the More Options button with the V, v, B or b button on the Remote Commander and press the PUSH ENTER button to open a menu for more detailed dial settings. You can change the settings of the desired items.
Note
The contents set with the More Options button have priority over those set in the Detail Dial Setup menu.
You can change the telephone number, IP address, name or setting registered in the Phone Book.
1 Open the Phone Book menu.
2 Use the V, v, B or b button on the Remote Commander to select the remote party to be changed in the Phone Book menu, then press the PUSH ENTER button.
The submenu appears.
Dial
Edit
Copy
Delete
Cancel
3 Press the V or v button on the Remote
Commander to select “Edit”, then press the PUSH ENTER button.
The List Edit menu appears.
4 Change the telephone number, IP address, name or setting.
5 Use the V, v, B or b button on the Remote Commander to select “Save”, then press the PUSH ENTER button.
The correction is completed.
70 Registering a Remote Party – Phone Book