When you connect the Data Solution Box to the Communication Terminal, connections with external monitors, etc. using the following four outputs are available. The connections allow output of the picture to one, two or three monitors selected from among four.
| Monitor A |
|
|
| Monitor B | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
to VIDEO OUT | to VIDEO OUT | |
MONITOR 2 | ||
MONITOR 1 | ||
| ||
| to RGB OUT |
to RGB OUT on the
Monitor D | Monitor C |
Select the output with “Monitor Out” in the Video Setup menu.
VIDEO 1: Outputs the signal to the monitor (monitor A in the illustration above) connected to the VIDEO OUT MONITOR 1 connector of the Communication Terminal.
VIDEO 2: Outputs the signal to the monitor (monitor B in the illustration above) connected to the VIDEO OUT MONITOR 2 connector of the Communication Terminal.
RGB OUT: Outputs the signal to the monitor (monitor C in the illustration above) connected to the RGB OUT connector of the Communication Terminal.
Displaying the Picture on a Projector or Monitor 151