9 Enter the sub-addresses.

Only numbers are available for a sub- address.

When you use one ISDN line, enter the same number both in the A1 and A2 text boxes (except for the USA and Canada).

ISDN Setup Wizard

Sub Address

A1:

A2:

B1:

B2:

C1:

C2:

Previous

 

Next

 

Cancel

Note

When you use the PCSA-B384S ISDN unit and connect 2 or 3 ISDN lines, enter the sub-addresses in the B1 to C2 text boxes in addition to the A1 and A2 boxes. When you use the PCSA-B768S and connect 2 to 6 ISDN lines, enter the sub- addresses in the B1 to F2 text boxes in addition to the A1 and A2 boxes. To open the menu with these text boxes, select “Next”, then press the PUSH ENTER button.

When you use the PCSA-PRI, Ch1 to Ch23 (T1), or Ch1 to Ch30 (E1) are displayed. Enter the telephone numbers according to the number of channels you will use.

10 Use the V, v, B or b button to select “Next”, then press the PUSH ENTER button.

The message window for confirmation appears.

11 Set the following items on the LAN.

LAN Setup Wizard

DHCP Mode

Off

Host Name

IP Address

Network Mask

Gateway Address

DNS Address

Previous

 

Next

 

Cancel

DHCP Mode

Sets the DHCP (Dynamic Host Configuration Protocol).

Auto: Automatically assigns your IP address, network mask, gateway address and DNS address.

Off: Deactivates DHCP. In this case set your IP address, network mask, gateway address and DNS address manually.

Host Name

Enter your host name.

IP Address

Enter your IP address.

Network Mask

Enter your network mask.

Gateway Address

Enter your default gateway address.

DNS Address

Enter your DNS (Domain Name

System) server address.

Note

When you set “DHCP Mode” to “Auto”, the assigned IP address is shown in the launcher menu (page 75) or Information menu (page 67).

If you do not know how to set up the LAN configuration, contact your network administrator.

Setting Up the System for the First Time — Initial Setup Wizard 35