On: Always conducts a multipoint videoconference.
Broadcast Mode
Allows you to select the broadcast mode. Split: Displays the video from the connected
terminals in split windows.
Voice Activate: Detects the terminal where the speaker has the loudest voice, and sends the video from this terminal to all other terminals.
Split
Allows you to select the type of split display used to display local and remote video on a single monitor during a multipoint
videoconference.
Automatic: When there are up to three terminals, the display is automatically split into four. When there are four or five terminals, the display is
automatically split into six.
Sender Screen
Allows you to select the monitor display of transmitting monitors during multipoint
videoconference.
Full Screen:Display the entire screen.
Automatic: When there are up to three terminals, the display is automatically split into four. When there are four or five terminals, the display is
automatically split into six.
The Status menu shows the current status of communication.
The ISDN Line Status, LAN Line Status or LAN Connection Status will also be displayed depending on the line interface used.
Communication Status
One page for each point connected to the system will be displayed. The connected point is shown at the upper right corner of the page as “Connection A (or B, C....)”.
The terminal’s name of the point is also displayed at its side.
The items below are shown both in the columns for “Encode” and “Decode”. The descriptions under “Encode” show the setting status of the local system and those under “Decode” show the status of the receiving.
Page 1/2
|
|
|
| Status | |||||
| Page: 1/2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| (Encode) |
| (Decode) |
|
|
| |
|
|
|
|
|
|
|
|
| |
| Audio Mode |
| G.728 |
| G.728 |
|
|
| |
|
|
|
|
|
|
|
|
| |
| Video Mode |
| H.261 CIF |
| H.261 CIF |
|
|
| |
|
|
|
|
|
|
|
|
| |
| Frame Rate |
| 15fps |
| 15fps |
|
|
| |
|
|
|
|
|
|
|
|
|
|
| LSD Rate |
| 6400 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| MLP Rate |
| Off |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| HMLP Rate |
| 62.4K |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cancel
Audio Mode
Displays the current audio encoding format.
Video Mode
Displays the current video encoding format.
Note
The audio encoding and video encoding formats used for communication with a remote party may differ from the settings in this menu, depending on the status of videoconferencing system on the remote site.
Frame Rate
Displays the maximum frame rate of motion pictures.
Registering Local Information 49