gMAIN CAMERA connector

Connect to the TERMINAL connector on the rear of the Camera.

hMAIN AUX IN connector (mini DIN 4-pin)

Connect to the video output of external video equipment.

iSUB CAMERA connector

Connect to the TERMINAL connector on the rear of the secondary camera.

jSUB AUX IN jack (mini DIN 7-pin)

Connect to the video output of external video equipment.

kDC 19.5V jack

Connect the supplied PCS-AC19V6 AC power adaptor.

lIR OUT 1/2 jacks

Connect the supplied IR repeater. Connect the IR repeater for the monitor connected to the VIDEO OUT MONITOR MAIN connector to the IR OUT 1 jack, and the IR repeater for the monitor connected to the VIDEO OUT MONITOR SUB connector to the IR OUT 2 jack.

mAUX CONTROL connector (D-sub 9-pin)

Used for maintenance service.

nCTRL-S jack (minijack)

Connect to the optional Remote Commander Signal Receptor.

The remote sensor of the Camera Unit does not operate when this connector is in use.

oU (ground) terminal

Connect a ground wire.

pVIDEO OUT AUX jack (phono jack)

Connect to the video input of the TV monitor or VCR.

qVIDEO OUT MONITOR 1 connector (mini DIN 4-pin)

Connect to the S-video input on the TV monitor or VCR.

rVIDEO OUT MONITOR 2 connector (mini DIN 4-pin)

Connect to the S-video input on the second TV monitor when the system uses the dual monitor mode.

sEC-MIC jacks (1, 2)

For future expansion. Not used.

tRGB OUT connector (D-sub 15- pin)

Connect to the RGB input of the optional projector or display unit.

uWHITE BOARD connector

Connect to the optional mimio Xi.

v100BASE-TX/10BASE-T connector (8-pin modular)

Used to conduct a conference via a LAN. Connect to a hub using the category 5 cable.

wDSB connector (D-sub 15-pin)

Connect to the TERMINAL connector on the optional PCSA-DSB1S Data Solution Box.

xISDN UNIT connector

Connect to the TERMINAL connector on the optional ISDN Unit such as PCSA-B384S, PCSA-B768S and PCSA-PRI.

194 Location and Function of Parts and Controls