For details on the standby mode, see “Standby Mode Function” on page 29.
Last Number Registration
Allows you to select whether to register the remote party in the Phone Book after the conference is finished.
On: If the remote party is not registered in
the Phone Book, the “Register this participant in the list?” message appears on the monitor screen when conference finishes. When you select “OK”, the List Edit menu opens.
Off: The message above does not appear and remote party registration does not take place.
Control by Far End
When “Far End Camera Control” is set to “On” in the Communication Setup menu, you can temporarily reject the camera control command transmitted by the remote party.
On: Accepts the camera control command.
Off: Rejects the camera control command.
Device Setup Page 2/2General
Device Setup |
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| Page: 2/2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Language | English |
|
|
|
| ||
|
|
|
|
|
|
|
| |
| IR Repeater Mode | MODE1 |
|
|
|
| ||
|
|
|
|
|
|
| ||
| T.120 PC Address |
| . | . | . |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Save |
|
| Cancel | |
Language
Allows you to select the menu and display language used by the system. You can select from the following languages: English, French, German, Japanese, Spanish, Italian, Simplified Chinese, and Portuguese.
IR Repeater Mode
Allows you to select the Remote Controller mode of the IR repeater. You should normally select “MODE 1”.
MODE 1: Select when using mode 1. This setting does not usually need to be changed.
MODE 2: Select when using mode 2. Select this mode when the system does not operate properly under “MODE 1”.
MODE 3: Select when using mode 3.
MODE 4: Select when using mode 4.
T.120 PC Address
When conducting a data conference based on the T.120 standard using NetMeeting, enter the IP address of the computer. (Used for ISDN connections.)
For details on data conferences based on the T.120 standard, see “Conducting a Data Conference Using NetMeeting – T.120 Data Conference” on page 138.
Menu Screens Page 1/3
|
|
| General | |
Menu Screens |
|
| ||
|
|
|
|
|
| Page: 1/3 |
|
|
|
|
|
|
|
|
| Time Display |
| On | |
|
|
|
| |
| Display Terminal Name |
| Off | |
|
|
|
| |
| Character Input Help |
| On | |
|
|
|
|
|
SaveCancel
Time Display
Allows you to select whether you display the elapsed time on the monitor screen during a conference.
On: Displays the elapsed time.
Off: Does not display the elapsed time.
Note
During communication, some items that cannot be modified are also displayed.
Display Terminal Name
Allows you to select whether to display the connected terminal names on the monitor screen at the time of disconnection.
Off: Not to display the terminal names.
Show temporarily: Display the terminal
names for a brief moment.
Always show: Display the terminal names.
54 Registering Local Information