Sending Motion Pictures Input from an External Camera or Other Equipment as Still Images
During communication a motion picture output from an external camera or VCR connected to the Communication Terminal can be frozen, and then sent to the remote party.
VISCA cable (not supplied)
to video output
MCU VIDEO OUT | AUDIO OUT | AUDIO IN | MAIN | SUB |
|
|
| MIC |
|
IR OUT |
|
|
| |
| VIDEO OUT |
|
|
|
to MAIN AUX IN
VCR, etc. | Video cable (not supplied) | Video converter |
| ||
| cable (supplied) | |
|
| |
to |
| |
output |
|
|
To send a still image
1
2
Open the Still Image menu.
Press the MENU button on the Remote Commander to display the Setup menu,
then select the (still image) icon with the V or v button.
Display the picture you want to send on the monitor screen.
Press the VIDEO INPUT SELECT button on the Remote Commander to display the Video Input Select menu, then select “AUX1” under “Near”, and press the PUSH ENTER button.
Notes
•Still images can only be sent from the device connected to the MAIN AUX IN connector.
•Selecting “IR1” or “IR2” allows you to display images input from the optional
•If you label “Main Camera”, “Sub Camera”, “IR1”, “IR2”, “AUX1”, or “AUX2” in Custom Input Label in the Video Setup menu, the specified name for each camera is displayed in the Video Input Select menu.
3 Use the V, v, B or b button on the Remote Commander to select “Send”, then press the PUSH ENTER button.
The motion picture on the monitor screen freezes, and a still picture is sent to the remote party. The still picture remains even after sending.
To cancel the still image display on the answering siteSelect “Clear”, or switch the input picture.
116 Sending Motion Pictures as Still Images