Menus 8 Chapter

8-4 Maintenance Menu

8-4-1 Items in the Maintenance Menu

The maintenance menu includes the following items.

For details about DRIVE MAINTENANCE, CHECK and

In the table, the underscored items are the factory default

SERVICE SUPPORT, refer to the Maintenance Manual.

settings.

 

 

 

 

 

 

 

 

 

AUDIO CONFIG: items relating to audio control

 

 

 

 

 

Item

 

Setting

 

 

 

METER HEAD ROOM

Select the audio reference level (headroom).

 

 

 

–12dB,–16dB, –18dB, –20dB (525(U)/525(J)-line modes)

 

 

 

–12dB, –16dB, –18dB, –20dB, EBUL (625-line mode)

 

 

DATA LENGTH

When “IMX50,” “IMX40,” or “IMX30” is selected in setup menu item 031, this selects the

 

 

 

audio quantization bit count and number of recording channels.

 

 

 

16⋅8 : 16 bits ⋅ 8 channels

 

 

 

 

24⋅4: 24 bits ⋅ 4 channels

 

 

 

 

 

 

 

 

 

 

 

 

Note

item 031 is set to “DVCAM,” the setting is automatically fixed at 16 bits ⋅ 4 channels.

 

 

 

When

 

 

 

NON-AUDIO INPUT

Select whether to handle digital audio signals as non-audio signals during recording.

 

 

 

 

 

 

Sub-item

 

 

 

 

 

 

 

 

 

 

1

 

tr1/tr2

audio: Handle as audio signals.

 

 

 

 

data: Handle as non-audio signals.

2

 

tr3/tr4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

 

tr5/tr6

 

 

 

 

 

 

 

 

 

 

 

 

 

4

 

tr7/tr8

 

 

 

 

 

 

 

 

INPUT LEVEL

Set the upper limit for the signal level input to audio channels 1/3 or 2/4.

 

 

 

+4dB, 0dB, –3dB, –6dB (525(U)/525(J)-line modes)

Sub-item

+4dB, 0dB, –3dB, –6dB, EBUL (625-line mode)

 

 

 

1

 

CH1/CH3

 

 

 

 

 

 

 

 

 

 

 

 

 

2

 

CH2/CH4

 

 

 

 

 

 

 

 

OUTPUT LEVEL

Set the reference level for audio output signals.

 

 

 

+4dB, 0dB, –3dB, –6dB (525(U)/525(J)-line modes)

 

 

 

+4dB, 0dB, –3dB, –6dB, EBUL (625-line mode)

 

 

 

 

 

 

 

NETWORK CONFIG: items relating to network settings

 

 

 

 

 

Item

 

 

Setting

 

 

 

 

DHCP

 

Set whether to assign an IP address automatically with the DHCP server.

 

 

 

 

DISABLE: Do not assign automatically.

 

 

 

 

ENABLE: Assign automatically.

 

 

 

 

 

IP ADDRESS PRESET

 

Set IP address.

 

 

 

 

192.168.001.010

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

When

DHCP is set to “ENABLE,” it is not possible to set the IP address.

 

 

 

 

SUBNET MASK PRESET

 

Set the subnet mask.

 

 

 

 

255.255.255.000

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

When

DHCP is set to “ENABLE,” it is not possible to set the subnet mask.

 

 

 

 

DEFAULT GATEWAY PRESET

 

Set the default gateway.

 

 

 

 

000.000.000.000

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

 

When

DHCP is set to “ENABLE,” it is not possible to set the default gateway.

 

 

 

 

 

 

 

 

106 8-4 Maintenance Menu