Operations File 7 Chapter

Extended commands

The following table shows the extended FTP commands

In the command syntax column, <SP> means a space,

supported by this unit.

 

 

 

entered by pressing the space bar, and <CRLF> means a

 

 

 

 

new line, entered by pressing the Enter key.

 

 

 

Command name

Description

Command syntax

 

 

 

 

SITE REPF

 

Sends an MXF file from the specified

SITE REPF <SP> <path-name> <SP> <start-frame> <SP>

 

 

path on this unit to the remote

<transfer-size> <CRLF>

 

 

computer. This command allows you to

<start-frame> specifies an offset from the start of the file.

 

 

specify a segment in the body of the

 

 

MXF file (composed of video and audio

Data is transferred from the video frame at the offset (the first

 

 

data), for transfer of the required

frame is 0).

 

 

segment only.

<transfer-size> specifies the number of video frames to

 

 

 

 

transfer (specify 0 to transfer to the end of the file).

 

 

 

 

 

 

Note

 

Input example: SITE REPF Clip/C0001.MXF 5 150 (Transfer

 

 

A segment greater than the file size

 

 

C0001.MXF. Body data is transferred only from frame 6 to

 

 

cannot be specified.

frame 155.)

 

 

 

 

SITE FSTS

 

Acquires the system status of this unit.

SITE FSTS <CRLF>

 

 

One of the following status codes is

 

 

 

sent.

 

 

 

0: Initial state, or no disc is loaded.

 

 

 

1: File system mount is OK.

 

 

 

3: File system mount is not OK.

 

 

 

 

 

SITE MEID

 

Acquires the media ID of the disc

SITE MEID <CRLF>

 

 

loaded in this unit.

 

 

 

 

 

SITE FUNC

 

Acquires the function and version of the

SITE FUNC <CRLF>

 

 

extended commands.

 

 

 

Information is sent in the following

 

 

 

format.

 

 

 

<main function> <SP> <branch

 

 

 

function> <SP> <branch function

 

 

 

version>

 

 

 

For XDCAM, sent in a format like “200

 

 

 

MXF DISK 1” (200 is a response code).

 

 

 

 

 

SITE UMMD

 

When C*.MXF file (*: 0001 to 0300) is

SITE UMMD <CRLF>

 

 

sent with the STOR, the copy source

 

 

 

UMID is saved if this command is

 

 

 

invoked immediately before the STOR

 

 

 

command.

 

 

 

 

 

 

84 7-3 FTP File Operations