NETWORK CONFIG: items relating to network settings

 

 

Item

Setting

 

 

LINK SPEED

Set the communications speed.

 

AUTO, 10Mbps, 100Mbps, 1000Mbps

 

 

DUPLEX

Set the communications method.

 

AUTO

 

Full Duplex: Full duplex

 

Half Duplex: Half duplex

 

 

For details of how to make settings, see “To change network settings” (page 109).

 

SETUP MAINTENANCE: items relating to the setup menu

 

 

 

 

Item

 

 

Setting

 

 

 

 

EXTENDED MENU

 

 

Select whether or not to display the extended menu.

 

 

 

DISABLE: Do not display.

 

 

 

ENABLE: Display.

 

 

 

 

SETUP BANK4

 

 

Select the bank to be stored in menu bank 4, or reset menu bank 4.

 

 

 

NO OPERATION: This function is disabled.

 

 

 

CURRENT: Store the current menu settings in menu bank 4.

 

 

 

BANK1: Store the menu bank 1 settings in menu bank 4.

 

 

 

BANK2: Store the menu bank 2 settings in menu bank 4.

 

 

 

BANK3: Store the menu bank 3 settings in menu bank 4.

 

 

 

RESET BANK4: Reset menu bank 4.

 

 

 

 

SAVE MENU DATA

 

 

Select whether to temporarily back up (save) setup menu settings before operations such as

 

 

 

software upgrades.

 

 

 

SET button: Back up (save) the settings.

 

 

 

MENU button: Return to next highest menu level without backing up.

 

 

 

 

LOAD MENU DATA

 

 

Select whether to restore (load) setting that were backed up (saved) with the “SAVE MENU

 

 

 

DATA” item.

 

 

 

SET button: Restore (load) the settings.

 

 

 

MENU button: Return to the next highest menu level without restoring.

 

 

 

 

AUTO BANK RECALL

 

 

Select whether to recall settings automatically from a menu bank when the system is

 

 

 

powered on, and if so which menu bank to recall from.

 

 

 

off: Do not recall settings from a menu bank.

 

 

 

from BANK1: Recall settings from menu bank 1.

 

 

 

from BANK2: Recall settings from menu bank 2.

 

 

 

from BANK3: Recall settings from menu bank 3.

 

 

 

from BANK4: Recall settings from menu bank 4.

 

 

 

 

RESET ALL SETUP

 

 

Reset the current menu settings to the factory settings.

 

 

 

SET button: Reset.

 

 

 

MENU button: Return to the next highest menu level without resetting.

 

 

 

 

 

 

 

 

Note

 

 

 

The line mode setting is also cleared. If you execute this item, reset the line mode (see page

 

 

14).

 

 

 

 

 

OTHERS

 

 

 

Item

 

Setting

 

 

 

SDI2 SUPER

 

Select whether to output superimpose characters to the SDI OUT2 (SUPER) connector.

 

 

ON: Output.

 

 

OFF: Do not output.

 

 

 

 

 

For details about OTHERS items other than the above, refer to the Maintenance Manual.

Menus 8 Chapter

8-4 Maintenance Menu 107