Sony PDW-1500 7-3-1Command List, Standard commands

7-3-1 Command List

This unit supports standard FTP commands (see the next section), and extended FTP commands (see page 84).

Standard commands

The following table shows the standard FTP commands supported by this unit.

In the command syntax column, <SP> means a space, entered by pressing the space bar, and <CRLF> means a new line, entered by pressing the Enter key.

Operations File 7 Chapter

Command name	Description	Command syntax
USER	Send this command to begin the login	USER <SP> <username> <CRLF>
	process.	Input example: USER admin
PASS	After sending the USER command,	PASS <SP> <password> <CRLF>
	send this command to complete the
	login process.	Input example: PASS pdw-1500
QUIT	Terminates the FTP connection. If a file	QUIT <CRLF>
	is being transferred, terminates after
	completion of the transfer.
PORT	Specifies the IP address and port to	PORT <SP> <h1,h2,h3,h4,p1,p2> <CRLF>
	which this unit should connect for the	• h1 (most significant byte) to h4 (least significant byte): IP
	next file transfer (for data transfer from
	this unit).	address
		• p1 (most significant byte), p2 (least significant byte): Port
		address
		Input example: PORT 10,0,0,1,242,48
		(IP address: 10.0.0.1, Port number: 62000)
PASV	This command requests this unit to	PASV <CRLF>
	“listen” on a data port (which is not its
	default data port). (It puts this unit into
	passive mode, waiting for the remote
	computer to make a data connection.)
TYPE	Specifies the type of data to be	TYPE <SP> <type-code (options delimited by <SP>)>
	transferred.	<CRLF>
		<type-code> can be any of the following. However, for
		XDCAM, data is always transferred as “I,” regardless of the
		type-code specification.
		• A: ASCII
		-	N: Non-print (default)
		-	T: Telnet format
		-	C: ASA Carriage Control
		• E: EBCDIC
		-	N: Non-print
		-	T: Telnet format
		-	C: ASA Carriage Control
		• I: IMAGE (Binary)
		• L: LOCAL BYTE
		-	SIZE: byte size
		Input example: TYPE I

80 7-3 FTP File Operations